- Three gear ratios 51:1 gives 23 N·m peak at up to 97 RPM, 81:1 gives 29 N·m at 61 RPM and 101:1 gives 34 N·m at 49 RPM.
- 10 arcsec backlash at 101:1 Gear backlash is 20 arcsec on the two lower ratios and 10 arcsec at 101:1.
- 0.45 kg base build The lighter of the two 50-frame modules: the CRA-RI50-70 has the same ratings at 0.66 kg.
- 150 W electrical platform All builds run from 24–48 V at 3.6 A rated and 5 A maximum continuous current, with a 0.089 N·m/A torque constant.
- Wider shaft on the -2E-EC build Base and -B builds have a 12 mm hollow shaft; the -2E-EC widens it to 13 mm and adds a 16/18-bit encoder option with EtherCAT.
- Three fully specified builds 63 mm at 0.45 kg for the base unit, 81.5 mm at 0.58 kg for the extended -B body, and 66.5 mm at 0.47 kg for the -2E-EC.
- Fourth build confirmed at quote The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
Description
The CRA-RI50-60 is the first Ti5 joint module with three gear ratios instead of two, and the first to reach double-digit precision: 23 N·m peak at 51:1 and 97 RPM, 29 N·m at 81:1, 34 N·m at 101:1 and 49 RPM, with gear backlash falling from 20 arcsec to 10 arcsec at the top ratio. At 0.45 kg for the base build it is the lighter of the two 50-frame modules.
That weight is the practical reason to pick it over the CRA-RI50-70. The two share the same drive: identical ratios, identical torque and speed tables, the same 150 W rating at 24–48 V with 3.6 A rated and 5 A maximum continuous current, the same 0.089 N·m/A torque constant and the same housing lengths. What the figures do separate is mass — 0.45 kg here against 0.66 kg there, and 0.58 kg against 0.78 kg for the extended body.
Three builds are fully specified. The base unit is 63 mm at 0.45 kg with a 12 mm hollow shaft and a 16-bit encoder on CAN. The -B body stretches to 81.5 mm at 0.58 kg with higher rotor inertia and the same bus. The -2E-EC is 66.5 mm at 0.47 kg, widens the hollow shaft to 13 mm and adds a 16/18-bit encoder option with EtherCAT alongside CAN. The -B-2E-EC designation completes the family, and its figures are confirmed with the quotation.
It is a component for builders of articulated machines — humanoid limbs, collaborative arm segments, legged prototypes, laboratory manipulators — where a joint can be specified, serviced and replaced as one unit. Structure, controller, power distribution and software remain the integrator's work.
Key Capabilities
- Three gear ratios: 51:1 gives 23 N·m peak at up to 97 RPM, 81:1 gives 29 N·m at 61 RPM and 101:1 gives 34 N·m at 49 RPM.
- 10 arcsec backlash at 101:1: Gear backlash is 20 arcsec on the two lower ratios and 10 arcsec at 101:1.
- 0.45 kg base build: The lighter of the two 50-frame modules: the CRA-RI50-70 has the same ratings at 0.66 kg.
- 150 W electrical platform: All builds run from 24–48 V at 3.6 A rated and 5 A maximum continuous current, with a 0.089 N·m/A torque constant.
- Wider shaft on the -2E-EC build: Base and -B builds have a 12 mm hollow shaft; the -2E-EC widens it to 13 mm and adds a 16/18-bit encoder option with EtherCAT.
- Three fully specified builds: 63 mm at 0.45 kg for the base unit, 81.5 mm at 0.58 kg for the extended -B body, and 66.5 mm at 0.47 kg for the -2E-EC.
- Fourth build confirmed at quote: The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Model Family | CRA-RI50-60-PRO-2 |
| Product Type | Integrated rotary joint module (motor, gearing, encoder, drive) |
| Builds | -XXX (base), -XXX-B (extended body), -XXX-2E-EC (dual encoder, EtherCAT) |
| Further Build | -XXX-B-2E-EC — confirm at quote |
| Gear Ratios | 51:1, 81:1, 101:1 |
| Peak Torque | 51:1 — 23 N·m; 81:1 — 29 N·m; 101:1 — 34 N·m |
| Max Allowable Torque at Average Load | 51:1 — 8.6 N·m; 81:1 and 101:1 — 13.5 N·m |
| Rated Torque at 2000 RPM Input | 51:1 — 6.6 N·m; 81:1 and 101:1 — 9.6 N·m |
| Peak Speed | 51:1 — 97 RPM; 81:1 — 61 RPM; 101:1 — 49 RPM |
| Rated Speed at Half Rated Torque | 51:1 — 75 RPM; 81:1 — 46 RPM; 101:1 — 37 RPM |
| Gear Backlash | 51:1 and 81:1 — 20 arcsec; 101:1 — 10 arcsec |
| Rated Power | 150 W |
| Supply Voltage | 24–48 V |
| Rated Current | 3.6 A |
| Max Continuous Current | 5 A |
| Torque Constant | 0.089 N·m/A |
| Encoder Resolution | 16-bit (base, -B); 16/18-bit option on -2E-EC |
| Communication Bus | CAN (base, -B); CAN or EtherCAT on -2E-EC |
| Hollow Shaft | 12 mm (base, -B); 13 mm (-2E-EC) |
| Length | 63 ±0.5 mm base; 81.5 ±0.5 mm -B; 66.5 ±0.5 mm -2E-EC |
| Mass | 0.45 kg base; 0.58 kg -B; 0.47 kg -2E-EC |
| Rotor Inertia | 158.8 g·cm² base; 228.8 g·cm² -B; 170.46 g·cm² -2E-EC |
| Ingress Protection | Confirm at quote |
| Operating Temperature | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
Three: 51:1 at 23 N·m peak and up to 97 RPM, 81:1 at 29 N·m and 61 RPM, and 101:1 at 34 N·m and 49 RPM. Backlash is 20 arcsec on the first two and 10 arcsec at 101:1.
By mass alone. The two share gear ratios, torque and speed tables, the 150 W electrical platform, the hollow-shaft sizes and the housing lengths; the 50-60 base build comes in at 0.45 kg and the 50-70 at 0.66 kg. Which of the two frames suits a given mounting is confirmed with the quotation.
The -2E-EC build, which comes with CAN or EtherCAT and a 16/18-bit encoder option. The base and -B builds use CAN with a 16-bit encoder.
Masses are 0.45 kg for the base build, 0.47 kg for the -2E-EC and 0.58 kg for the extended -B body. The -B-2E-EC mass is confirmed with the quotation.
The base and -B builds have a 12 mm hollow shaft; the -2E-EC build has 13 mm, which is useful when more cable has to pass through the joint axis.
It is offered by quotation. Version, gear ratio or configuration, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
